Regular Papers

International Journal of Control, Automation and Systems 2016; 14(2): 378-388

Published online April 15, 2016

https://doi.org/10.1007/s12555-015-0010-6

© The International Journal of Control, Automation, and Systems

Adaptive Fuzzy Robust Control of PMSM with Smooth Inverse Based Dead-zone Compensation

Xingjian Wang* and Shaoping Wang

Beihang University

Abstract

It is a challenging work to design high precision/high performance motion controller for permanent magnet synchronous motor (PMSM) due to some difficulties, such as varying operating conditions, parametric uncertainties and external disturbances. In order to improve tracking control performance of PMSM, this paper proposes an adaptive fuzzy robust control (AFRC) algorithm with smooth inverse based dead-zone compensation. Instead of nonsmooth dead-zone inverse which would cause the possible control signal chattering phenomenon, a new smooth dead-zone inverse is proposed for non-symmetric dead-zone compensation in PMSM system. AFRC controller is synthesized by combining backstepping technique and small gain theorem. Discontinuous projectionbased parameter adaptive law is used to estimate unknown system parameters. The Takagi-Sugeno fuzzy logic systems are employed to approximate the unstructured dynamics. Robust control law ensures the robustness of closed loop control system. The proposed AFRC algorithm with smooth inverse based dead-zone compensation is verified on a practical PMSM control system. The comparative experimental results indicate that the smooth inverse for non-symmetric dead-zone nonlinearity can effectively avoid the chattering phenomenon which would be caused by nonsmooth dead-zone inverse, and the proposed control strategy can improve the PMSM output tracking performance.

Keywords Adaptive control, dead-zone, fuzzy logic system, motion control, permanent magnet synchronous motor.

Article

Regular Papers

International Journal of Control, Automation and Systems 2016; 14(2): 378-388

Published online April 1, 2016 https://doi.org/10.1007/s12555-015-0010-6

Copyright © The International Journal of Control, Automation, and Systems.

Adaptive Fuzzy Robust Control of PMSM with Smooth Inverse Based Dead-zone Compensation

Xingjian Wang* and Shaoping Wang

Beihang University

Abstract

It is a challenging work to design high precision/high performance motion controller for permanent magnet synchronous motor (PMSM) due to some difficulties, such as varying operating conditions, parametric uncertainties and external disturbances. In order to improve tracking control performance of PMSM, this paper proposes an adaptive fuzzy robust control (AFRC) algorithm with smooth inverse based dead-zone compensation. Instead of nonsmooth dead-zone inverse which would cause the possible control signal chattering phenomenon, a new smooth dead-zone inverse is proposed for non-symmetric dead-zone compensation in PMSM system. AFRC controller is synthesized by combining backstepping technique and small gain theorem. Discontinuous projectionbased parameter adaptive law is used to estimate unknown system parameters. The Takagi-Sugeno fuzzy logic systems are employed to approximate the unstructured dynamics. Robust control law ensures the robustness of closed loop control system. The proposed AFRC algorithm with smooth inverse based dead-zone compensation is verified on a practical PMSM control system. The comparative experimental results indicate that the smooth inverse for non-symmetric dead-zone nonlinearity can effectively avoid the chattering phenomenon which would be caused by nonsmooth dead-zone inverse, and the proposed control strategy can improve the PMSM output tracking performance.

Keywords: Adaptive control, dead-zone, fuzzy logic system, motion control, permanent magnet synchronous motor.

IJCAS
May 2024

Vol. 22, No. 5, pp. 1461~1759

Stats or Metrics

Share this article on

  • line

Related articles in IJCAS

IJCAS

eISSN 2005-4092
pISSN 1598-6446