International Journal of Control, Automation, and Systems 2024; 22(1): 311-322
https://doi.org/10.1007/s12555-022-0205-6
© The International Journal of Control, Automation, and Systems
This paper presents a novel image-based visual servoing (IBVS) controller for a six-degree-of-freedom (6-DoF) robot manipulator by employing a fuzzy adaptive model predictive control (FAMPC) approach. The control strategy allows the robot to track the desired feature points adaptively and fulfill kinematic constraints appearing in a vision-guided task with different initial Cartesian poses. To this aim, the successive linearization method is firstly employed to transform the nonlinear IBVS model to the linear time-invariant (LTI) one at each sampling instant. The nonlinear optimization problem is therefore degraded into a convex quadratic programming (QP) problem. Subsequently, a fuzzy logic is exploited to tune the weighting coefficients in the cost function on the basis of image pixels changes at each step, endowing the reliable adaptation capabilities to different working environments. Experimental comparison tests performed on a 6-DoF robot manipulator with an eye-in-hand configuration are provided to demonstrate the efficacy of the proposed controller.
Keywords Fuzzy adaptive model predictive control, image-based visual servoing, robot manipulator, successive linearization.
International Journal of Control, Automation, and Systems 2024; 22(1): 311-322
Published online January 1, 2024 https://doi.org/10.1007/s12555-022-0205-6
Copyright © The International Journal of Control, Automation, and Systems.
Tianqi Zhu, Jianliang Mao*, Linyan Han, and Chuanlin Zhang
Shanghai University of Electric Power
This paper presents a novel image-based visual servoing (IBVS) controller for a six-degree-of-freedom (6-DoF) robot manipulator by employing a fuzzy adaptive model predictive control (FAMPC) approach. The control strategy allows the robot to track the desired feature points adaptively and fulfill kinematic constraints appearing in a vision-guided task with different initial Cartesian poses. To this aim, the successive linearization method is firstly employed to transform the nonlinear IBVS model to the linear time-invariant (LTI) one at each sampling instant. The nonlinear optimization problem is therefore degraded into a convex quadratic programming (QP) problem. Subsequently, a fuzzy logic is exploited to tune the weighting coefficients in the cost function on the basis of image pixels changes at each step, endowing the reliable adaptation capabilities to different working environments. Experimental comparison tests performed on a 6-DoF robot manipulator with an eye-in-hand configuration are provided to demonstrate the efficacy of the proposed controller.
Keywords: Fuzzy adaptive model predictive control, image-based visual servoing, robot manipulator, successive linearization.
Vol. 23, No. 3, pp. 683~972
Junyoung Lee, Byeonggi Yu, Kyu-Sang Yu, Wansup Kim, and Murim Kim*
International Journal of Control, Automation, and Systems 2025; 23(2): 467-478Jun-Hyuck Sung and Hyun-Min Joe*
International Journal of Control, Automation, and Systems 2025; 23(1): 223-234Sang-Deok Lee and Seul Jung*
International Journal of Control, Automation and Systems 2021; 19(12): 4025-4033